The Toyota Land Cruiser 300 Series is one of the most capable, most sought-after 4WDs on the planet and one of the hardest to get. Owners who have one look after it. This ornamesh windscreen sun visor is individually manufactured to suit the Land Cruiser 300 Series from 2021 onwards, giving Australia’s flagship 4WD a practical, purposeful upgrade that reduces glare, cuts cabin heat, and adds a tough exterior presence that matches the vehicle’s character perfectly.

Filtered shade across the upper windscreen — at all times. The LC300’s large, steeply raked windscreen admits a significant amount of high-angle sunlight, particularly during early morning and late afternoon drives when the sun sits low and hard. This ornamesh visor intercepts that light before it reaches the glass, filtering it through a woven black powder coated mesh that delivers continuous, even shade across the upper windscreen zone at all angles and all times of day. Unlike a solid visor that creates a hard cutoff between shade and full glare, the mesh filters gently — reducing eye strain and driver fatigue without a jarring visual transition.

 

Purpose-built for the 300 Series — not a generic fit. The LC300 introduced a completely redesigned body over the outgoing 200 Series, with a new roofline, revised A-pillar geometry, and updated windscreen profile. This visor is individually manufactured to suit the J300 body specifically. It follows the roofline accurately, sits flush against the cab, and mounts securely without gaps or flex. A universal or carry-over visor won’t fit right on a 300 Series — and on a vehicle of this calibre, that matters.

Built tough — alloy surrounds and stainless steel end clips. The frame uses alloy surrounds for rigid, lightweight support, and stainless steel end clips that resist corrosion through years of outback dust, coastal salt air, and all-weather driving. The black powder coat on the mesh is UV-stable and durable, maintaining its appearance and integrity over the long haul. Made on the premises at factory direct prices, this is an Australian-made product built to the standard that LC300 owners expect — not an imported generic accessory assembled from off-the-shelf parts.

Protects your interior and reduces air conditioning load. By blocking direct solar radiation through the upper windscreen, this visor does more than reduce glare. It lowers the amount of heat entering the cabin, helping keep interior temperatures down and reducing the load on your air conditioning — meaningful on long outback drives where fuel efficiency and cabin comfort matter equally. It also shields your dashboard, instrument cluster surround, and upper trim from accelerated UV fading — protecting the condition and resale value of one of Australia’s most expensive and coveted 4WDs.

Installed with self-tapping screws to side pillars. The visor mounts via self-tapping screws to the side pillars for a firm, permanent, rattle-free installation. All hardware is included. Some drilling is required but the process is well within DIY scope for any owner comfortable with basic tools. Any 4WD accessories workshop can also handle the fitting quickly if preferred.

Note on snorkel compatibility: Some windscreen visors are not suitable for vehicles fitted with a snorkel. If your LC300 has a snorkel installed, contact us with photos prior to ordering to confirm suitability.

---

Compatible Vehicles:

• Toyota Land Cruiser 300 Series (J300) — 2021 onwards
• All variants including GX, GXL, VX, Sahara, and Sahara ZX

---

What’s in the Box:

• 1x Ornamesh Windscreen Sun Visor
• Alloy surrounds and stainless steel end clips
• Self-tapping screws and mounting hardware
• Installation instructions

---

Key Features:

• Black powder coated ornamesh — continuous filtered shade
• Alloy surrounds with stainless steel end clips
• Individually manufactured for Toyota Land Cruiser 300 Series 2021 onwards
• Reduces glare, heat, and UV through the upper windscreen
• Protects dashboard and interior trim from UV fading
• Self-tapping screw mount to side pillars — firm, rattle-free installation
• Australian made at factory direct prices
• Contact us before ordering if snorkel is fitted

---

Frequently Asked Questions

Which Land Cruiser models does this visor fit? This visor is designed specifically for the Toyota Land Cruiser 300 Series (J300) from 2021 onwards, across all variants including GX, GXL, VX, Sahara, and Sahara ZX. It does not fit the outgoing 200 Series or any earlier Land Cruiser generation. If you are unsure of your series, check the compliance plate inside your driver’s door jamb or contact us before ordering.

What is ornamesh and how does it differ from a solid visor? Ornamesh is a woven wire mesh that filters sunlight rather than blocking it entirely. A solid visor creates a hard line between full shade and full glare. Ornamesh delivers continuous, even filtered shade at all sun angles and all times of day, which is gentler on the eyes and better suited to the LC300’s large windscreen profile where sun exposure shifts significantly across a long drive.

Does the mesh obstruct my forward visibility while driving? No. The Toyota Land Cruiser 300 Series Mesh Windscreen Sun Visor sits above the windscreen glass line and targets the high-angle sun zone. It does not intrude on your forward field of vision. The filtered shade effect produces a smooth visual transition rather than a hard cutoff, which is actually easier on the eyes than a solid visor during long driving days.

What finish does the visor come in? The Toyota Land Cruiser 300 Series Mesh Windscreen Sun Visor comes in a black powder coat finish that is UV-stable, corrosion-resistant, and durable under prolonged outdoor exposure. It suits the LC300’s bold exterior styling and requires no painting or preparation before fitting.

Does it come ready to install? Yes. The Toyota Land Cruiser 300 Series Mesh Windscreen Sun Visor comes fully assembled and ready to install straight out of the box. No painting or surface preparation is required, unlike solid steel visors that come in primer.

How is it installed and does it require drilling? The visor is mounted using self-tapping screws to the side pillars. Some drilling is required. All necessary hardware is included in the kit. The installation is well within DIY scope for any owner with basic tools, and any 4WD accessories workshop can handle the fitting if preferred.

Will it rattle on corrugated outback roads? No. The self-tapping screw mount to the side pillars creates a firm, permanent installation. Because the visor is individually manufactured for the LC300’s specific roofline rather than a generic fit, it sits flush and secure — no rattling or shifting on corrugated roads or at highway speeds.

Is this compatible with my LC300 if it has a snorkel fitted? Some Toyota Land Cruiser 300 Series Mesh Windscreen Sun Visor are not compatible with snorkel-equipped vehicles, as the snorkel can interfere with the mounting position. If your Land Cruiser 300 has a snorkel installed, contact us with photos of your setup before ordering so we can confirm suitability.

How does it hold up to Australian outback conditions? The alloy surrounds, stainless steel end clips, and powder coated mesh are all selected for long-term performance in Australian conditions — extreme UV exposure, outback heat, coastal salt air, and corrugated road vibration. This is not an import product — it is Australian made to standards suited to the environments LC300 owners actually drive in.

Will this affect the LC300’s pre-collision safety system or sensors? TheToyota Land Cruiser 300 Series Mesh Windscreen Sun Visor mounts externally above the windscreen glass line. It does not interfere with the windscreen itself or any sensors mounted within the glass. However, if you have any concerns about your specific variant’s sensor configuration, contact us before ordering.

Can I order this for a fleet of Land Cruiser 300 Series vehicles? Yes. Contact us directly for fleet or bulk pricing and lead times.

Does this suit right-hand drive Australian-delivered models? Yes. This visor is manufactured for Australian-delivered right-hand drive Land Cruiser 300 Series vehicles. If you are purchasing from outside Australia or have a left-hand drive model, contact us to confirm compatibility before ordering.

TAGs land cruiser 300 series sun visor, LC300 windscreen visor, toyota landcruiser 300 mesh visor, J300 sun visor, LC300 accessories, landcruiser 300 glare reduction, toyota 300 series 4wd visor, landcruiser 300 exterior accessories, Toyota Land Cruiser 300 Series Mesh Windscreen Sun Visor,buy Buy Toyota Land Cruiser 300 Series Mesh Windscreen Sunvisor,Toyota Land Cruiser 300 Series 2021 onwards sunvisors.